Our product features a 100% natural stone surface, created through a real stone peeling process rather than cutting. We offer standard sizes of 24in x 48in, along with some options in 48in x 96in and 48in x 120in. Thicknesses range from 1.5mm to 4mm (1/16″ to 1/8″). Customization is available for minimum orders of 20,000 sq. ft., but please note that these custom orders cannot be returned.

They can be applied to a wide variety of flat or curved surfaces, including gypsum board (also known as drywall), wood, metal, concrete, and others.
To adhere our products to the substrate, ensure the substrate is clean and free of bumps. Then cover all the edges of the veneers with masking tape to prevent the adhesive from staining the stone surface during application. Afterward, apply a qualified adhesive to the entire back of the product or the substrate surface. Once the material is in place, use a pressure roller to enhance the adhesion of the products to the substrate.

The Surface Roughness Index (SRI) is a measure used to quantify the texture or roughness of a material’s surface. It essentially reflects how smooth or rugged the surface of a material is. In the context of building materials like stone, tiles, or veneers, SRI becomes particularly important as it influences both the aesthetic appeal and functional aspects like adhesion, friction, and wear resistance.
For our products, the SRI is an important parameter, as it directly impacts the material’s natural appearance and its suitability for various applications. Higher SRI values generally indicate a rougher texture, which might be desirable for certain design aesthetics or functional requirements like non-slip surfaces. Conversely, lower SRI values signify a smoother surface, often preferred for sleek, polished finishes.
Understanding the SRI of our products can help you make more informed choices about their suitability for your specific project needs, whether you’re aiming for a rustic feel or a more refined look.

To address the seams of the stone veneers with an SRI of 1-4, you can use grouting or installing metal trims. For those materials with an SRI of 1 or 2, a butt joint is also an effective method.

To properly finish the corners of products with an SRI of 1-4, you can utilize grouting or corner metal trims to create a neat junction. For products with an SRI of 1 or 2, options include a lap joint or mitering for a more precise edge. However, for products with an SRI of 3, a lap joint should only be used when layering a textured edge over a smoother one. It’s advisable to avoid lap joints or mitering for products with an SRI of 4 for optimal results.

When installing veneer on walls that extends to meet the floor or ceiling, we recommend the use of a metal reveal. This creates a visually appealing transition and maintains a clean and professional appearance between the stone veneer and the adjacent surfaces.

For indoor and outdoor application.

Our product is suitable for outdoor use and is weather-resistant and stable, meaning it will not stretch or warp due to weather conditions. We have conducted various tests to confirm its resistance to weathering, rain’s acidity and alkalinity, temperature differences, and oxygen index.

Since our product is made from 100% natural stone, it will not significantly fade over time. However, there may be slight color changes due to oxidation caused by exposure to ultraviolet light, which are hard to notice and will not affect its overall appearance.
Yes, there are differences between installing the translucent series and the regular series. For optimal results, we recommend a 6-inch gap between the light panel and our translucent stone panel, and the use of an acrylic board or tempered glass as the substrate for the stone panel. Additionally, a clear adhesive is necessary to attach the stone panel to the clear substrate.

Certainly, our products are waterproof and ideal for shower wall and sauna rooms installations. Ensure you use a waterproof adhesive during application.

Yes, our products are highly flexible, their most significant characteristic, allowing for application on curved walls and pillars with a minimum curve diameter of 15 inches.

Yes, our products are resistant to temperatures up to 400°F and are suitable for the surrounding walls of the fireplace. However, they should not be used on the interior walls that come into direct contact with flames.

It can be applied to the ceilings as long as the surface to which it is being applied is clean and has no bumps. However, it is not recommended for use on roofs.

Yes, it can be used as an exterior building façade and retaining walls. Our products are very easy to install, offering installation speeds up to six times faster than traditional stone and weighing only 1/10th as much, adding no extra load to the structure. This can save a significant amount of time and money, especially for large-scale projects.

Since the material’s surface is raw and textured, it’s typically not advised for heavy-use areas like kitchen countertops. However, for a natural stone appearance, it can be applied to bar tops not used for kitchen prep. It is well-suited for vertical surfaces.
Also, it is suitable for furniture and cabinetry, because it can be easily cut and adhered, it can make your furniture a unique piece and adorn your cabinetry, giving it a natural look.

Definitely! Some of our stone materials can be cut with tin snips, and all are suitable for laser cutting, allowing you to achieve the precise shapes you desire. This enables the creation of unique and beautiful maca stone collages!

Yes, we offer a trade program for industry professionals. Please visit our trade page to apply. Upon approval, you will be eligible for a special discount!